Products - Toyota

  • NGK SILICONE IGNITION LEADS- TOYOTA CELICA GT4

    NGK IGNITION LEADSLive Help - Click to Chat
    NGK Logo

    Model: ST205 (3S-GTE)
    Description: TX69/T2

    NGK Spark Plug Wire's are built to meet stringent OEM tolerances. At the center of NGK Resistor Spark Plug Wire Sets is a fiberglass stranded core, made from the same family of materials used in bullet proof vests. This core greatly enhances the overall strength of the wire, providing a super strength backbone on which the various layers of the wire assembly are formed. The core gives protection from damage caused by the pulling strains that wires are often subjected to and that can destroy their performance.

    High quality EPDM and Silicone coverings resist high heat, oil and chemical damage for increased durability.
    Custom designed terminal boots provide an exact fit.
    Each NGK ignition wire is fitted with a positive locking, corrosion resistant, Stainless Steel terminal end for tight fit and maximum resistance to vibration and separation.
    NGK Wire Sets are numbered for easy cylinder identification.

     
    Price: £54.95 inc. vat

    Zoom Imageout of stock

    Related Products

  • NGK SILICONE IGNITION LEADS- TOYOTA MR2 TURBO (8/92-95)

    NGK IGNITION LEADSLive Help - Click to Chat
    NGK Logo

    Model: 8/1992 - 1995 Models Only (3S-GTE)
    Description: TX69/T1

    NGK Spark Plug Wire's are built to meet stringent OEM tolerances. At the center of NGK Resistor Spark Plug Wire Sets is a fiberglass stranded core, made from the same family of materials used in bullet proof vests. This core greatly enhances the overall strength of the wire, providing a super strength backbone on which the various layers of the wire assembly are formed. The core gives protection from damage caused by the pulling strains that wires are often subjected to and that can destroy their performance.

    High quality EPDM and Silicone coverings resist high heat, oil and chemical damage for increased durability.
    Custom designed terminal boots provide an exact fit.
    Each NGK ignition wire is fitted with a positive locking, corrosion resistant, Stainless Steel terminal end for tight fit and maximum resistance to vibration and separation.
    NGK Wire Sets are numbered for easy cylinder identification.

     
    Price: £54.95 inc. vat

    Zoom Imageout of stock

    Related Products

  • Perrin EBCS PRO 3 Port (Electronic Boost Solenoid)

    Perrin SolenoidLive Help - Click to Chat
    Perrin Performance

    Model: Subaru Impreza / Mitsubishi Evo / Universal
    Description: ASM-TAC-725

     

    Perrin Boost Control (3 Port) Solenoid (New EBCS PRO)

     

    * NEW REVISED VERSION 2 - NOW SUPPLIED FROM PERRIN WITH FEMALE PLUG & PLAY ADAPTOR FOR MOST APPLICATIONS! *

     

    The Perrin 3 port boost solenoid is especially well known to Subaru Impreza WRX/STi and Mitsubishi Evo tuners, but will fit most turbo charged applications universally.

     

    Factory boost control management relies solely on a flimsy, inefficient actuator. When boost levels are increased over stock, by the use of aftermarket ECU’s, these factory actuators fail to properly meter boost. The resulting spikes, dips and erratic response can not only damage your engine but certainly spoil the performance gains.

     

    Don't let your factory solenoid become the weakest link in your engine bay!


    The PERRIN EBCS™ was the first and original aftermarket boost control solenoid, and now they've have taken it one step further with the EBCS Pro™! Improvements to the previous version now include:

     

    - Higher quality construction using stainless steel & aluminum (no longer plastic)

    - Higher quality fittings made from nickel plated brass (again no longer plastic)

    - Rated to 250F (compared to just 150F previously)

    - Faster response time (twice as fast as the previous versio EBCS)


    The PERRIN EBCS Pro™ functions very different than the OEM solenoid. You will get faster boost response (more power down low), and the ability to hold more boost at higher RPM's. Since the EBCS Pro™ works differently than stock, it does require ECU re-tuning to achieve it's potential.

     
    Price: £94.95 inc. vat

    Zoom Image

  • RED 'T' PULL CABLE - 1.8 METERS

    T PULLLive Help - Click to Chat
    Sytec logo

    Model: Universal
    Description: TPK001

    Motorsport 'T' Pull Cable 1.8 metres for fire or battery master cut off Switch or isolator. The cable is strong and flexible with nylon inner liners.

    * FREE UK DELIVERY *

     
    Price: £7.95 inc. vat

    Zoom Image

    Related Products

  • RED 'T' PULL CABLE - 3.7 METERS

    T PULLLive Help - Click to Chat
    Sytec logo

    Model: Universal
    Description: TPK002

    Motorsport 'T' Pull Cable 3.7 metres (12 ft) for fire or battery master cut off Switch or isolator. The cable is strong and flexible with nylon inner liners.

     

    * FREE UK DELIVERY *

     
    Price: £8.95 inc. vat

    Zoom Image

    Related Products


Secure checkout with PayPal

Toyota - Walbro Fuel Pumps & Kits

All prices quoted on this site are in GBP Sterling and include VAT @ 17.5%. JP4mance reserve the right to make alterations to specifications and prices without further notice

ACT - ADL Blueprint - AEM - Aeromotive - Apexi - ARP - Bando / Koyo / NPW - Black Diamond - Blitz - Bosch - Brembo - Brian Crower - Competition Clutch (Flywheels) - Competition Clutch (Stage 1) - Competition Clutch (STAGE 2) - Competition Clutch (STAGE 3) - CRN Brakes - DC Sports - EBC Brakes - Exedy - Facet - Ferodo Pads - Fidanza - FILTER KING - FSE - Greddy - HKS - Injen - JP4mance Tuning Parts - Koyo - KYB Suspension - Mintex - Mishimoto - NGK - NPW WATER PUMPS - Performance Friction Brakes - Perrin Performance - Piper - Powerflex - RC Injectors - Sard - Skunk2 - Sytec - Topline - Vibrant Performance - Walbro